Automatic recorder of 5 hours built-in the 3 channel receiver
KKCR-360


Outline
  • It is the exclusive quantity sensitivity automatic recorder of the transmitter for various kinds and a telephone, or a sound starting transmitter. On the tape for 150 minutes, the conversation for 5 hour etc. is recorded automatically.
  • Only when an electric wave is received, a tape recorder records automatically. Since only sound (voice) will be recorded if it uses combining the transmitter of a sound starting formula, a tape does not become useless. And since it can be collectively heard later when required, it is very convenient.
  • Since the telephone number of the telephoned partner point is also recorded when the transmitter for a telephone is recorded, the decipherment display of the telephone number can be carried out with a decipherment device (DEC-1) later.
  • Automatic recording can be carried out also in the place which does not have a power supply for battery built-in for a long time, left it. And since AC adapter can also be used, it can be used further for a long period of time.
Directions
  • If power is applied so that a part for the central part ahead of the lid of the main part upper part may be raised upwards, a lid will open to double doors opening outward. a battery box two batteries of U2 and polarity are put in to prevent mistakes It puts in so that the minus portion of a battery may hit the direction which is a coil spring.
  • It is the switch which chooses the channel which a slide switch (display of A. B.C) receives. A part for 5 hour is recorded on the tape for 150 minutes in the twice as many switch position written to be a recording time change of the upper surface of the operation button of a tape recorder as this. A standard records a part for 2 hour of original speed. Also in reproduction, it becomes the same. When a telephone number needs to be decoded, it is made to carry out recording in a standard. The upper surface front of a built-in tape recorder performs receipts and payments of a tape in the state where it opened to the upper one. If it has both the sides of an upper lid at the finger point and it raises upwards, a lid will open. A cassette is put in so that the direction a tape appears may become this side.
  • Subsequently, the power supply switch at the right end of the front of a main part is raised to the direction of (ON). The next switches are being automatic (AUTO) and a manual (MANUAL) change switch. As for (AUTO), an internal receiver's reception of an electric wave begins to operate a tape recorder. Regardless of reception of an electric wave, (MANUAL) operates. (MANUAL) is used when playing and hearing a tape. Next, an attached antenna is put to a right-hand side terminal (ANT). It is crowded. After having extracted the volume regulation knob (VOL) to the left, the plug of the earphone code for monitors is inserted in the jack (EAR) of the center of the front, and an earphone is put in an ear.
  • Furthermore, if a knob is turned to the right for a while, an ear will hear the sound from a transmitter. When no sound can be heard, it checks [ to which the front pilot lamp is on red / or or ] whether the channel switch (ABC) of a receiver part is further correct by carrying out a check. Nothing can be heard if the distance with a transmitter separates too much. When the electric wave is not sending or the channel is not correct, no sound can be heard even if it turns (VOL) to the right. Since a sound powerful at a stretch will go into an ear and will hurt its ear when an electric wave is received if it keeps turned, be careful.
  • After checking that sound is clearly heard in the upper state, the recording button (REC) of a tape recorder is pushed. The sound which hears the tape at the beginning of the surroundings is recorded. If it is (AUTO) and an electric wave will fail, a tape will also stop automatically. Since the automatic volume regulation function is built in, a recording level is always recorded clearly. (VOL) is regulation of only the volume of an earphone.
  • A switch is set to (MANUAL) when playing a tape. The volume regulation at the time of reproduction has a regulation knob in a left-hand side horizontal side. The terminal for earphones is next to it. It can be heard by the attached earphone. Operation is the same as that of a common tape recorder.
  • It is left for a long period of time, and when using, AC adapter of exclusive use is used. A terminal is in a right-hand side horizontal side. By inserting a terminal, the supply from a battery is cut and a power supply is automatically supplied from an adapter. (Option)
Specification of KKCR-360
      5 houres automatic recorder built in the receiver
      Receiving sensitivity 0.3microV (-117dbm) S / N 20db
      Received frequency Three channel switch change
        A channel 398.605Mhz,
        B channel 399.455Mhz,
        C channel 399.030Mhz
      Power supply voltage 3V (dry cell U2 x2) or AC adapter (3V)(option)
      Consumption current
            The time abbreviation of 20mA operation 200mA use time
      Continuation operation abbreviation 5 hours (at the time of alkali dry cell use)
      Recording time 5 hours, 2.5 hours Manual change (150 minute tape)
      Automatic reversal, automatic cutoff mechanism built-in
      Antenna terminal BNC impedance 50 ohms Use Helical Or Yagi Antenna (option)
      Outside size length 100mm, width 230mm, height 40mm
      Weight About 1kg
Notes
  • In prolonged recording (twice), the tone quality recorded becomes bad somewhat. When it is due to use a number decipherment device, it records to standard recording. When not using it for a long period of time, a battery is surely taken out.
  • When installing in the outdoors exposed to a rainstorm, it surely carries out putting into the bags made from resin (vinyl, polyethylene, etc.) etc., and rain water etc. is made to sink into a main part.