Transmitter built-in common type socket to hear a sound.
KBZ-110
Outline
  • Since it is what built the transmitter in the electric light line 3 tap hole common socket, installation is easy and a battery is unnecessary, once it installs, it can be used semi-permanently.
  • Since a highly efficient microphone and amplifier are built in, even if it installs in the corner of the room, the conversation of a low voice can also be caught clearly.
  • The portion of three holes can insert and use a code ordinarily.
  • An exclusive receiver (KUR-400) is used for receiving.
  • A receivable distance is about 150m.
  • It can be heard in the place about 1km away using relay equipment (RP-300A).
  • Prolonged automatic recording is made to the recorder of a commercial sound perception starting system.
Directions
  • The wall socket currently installed in the wall of the room can be used only by inserting a main part in the opening of 100v ~120V of AC.
  • Although it can be ordinarily used by the ability inserting the code of an electric product, please do not connect mass apparatus to the installed main part.
  • The notification distance of an electric wave is 50 or 150m. In the place where the inside of a building and the house build and are crowded, how to transmit an electric wave becomes bad and a receivable distance becomes short.
  • Although it is receivable with commercial UHF Scanner channel receiver, tone quality is bad or notification distance becomes short.
  • Automatic recording can also be carried out to the recorder with the commercial voice starting recording function using the recording code of attachment in an exclusive receiver (KUR-400). When you make it automatic recording, please be sure to carry out a check of operation. The recording code of receiver attachment is put in the earphone terminal of a receiver, and the external microphone terminal of a recorder, a recorder is set to a voice starting system, and a recording button is pushed. Every [ a few ] is extracted for the volume knob of a receiver until it sets a transmitter in a quiet place and a recorder will be in a recording stop state from a recording state. Subsequently, it is completion, if voice is uttered and recording is started.
  • If the newest digital I.C recorder is used, a part for 10 hours can be recorded continuously, and moreover, it can take in and save and reproduce in a personal computer.
Specification of KBZ-110
      Transmitter built-in common type socket to hear a sound.
      Moduratin system Narrow band width frequency modulation
                    (maximum frequency deviation +-10Khz)
      Dispatch output 3mW or less
      Dispatch frequency Three kinds
              A channel 398.605Mhz
              B channel 399.455Mhz
              C channel 399.030Mhz One either
      Operating voltage A.C90V ~ A.C120V 50 ~ 60Hz (option for A.C220V)
      Outside size 14X54X65mm
      Weight About 48g

Notes
  • The thing beyond 500W should not use the home electronics connected with a socket. Apparatus, such as an electric heater, may generate heat in a socket portion, and an internal transmitter may damage it.
  • Please do not attach a magnet in a main part. An electric wave does not become weak or it stops coming out..