�@

• It is the power supply equipment changed into D.C3V from A.C100V.
  
• Current can be taken out to 10mA with being micro (12x18x6mm).
  
• It is the efficient design which pressed down generation of heat extremely.
  
• There is preeminent stability to input change and load change.
  
• The object for A.C220V can also be manufactured.
  
• It is the internal-organs unit of a socket type transmitter (KAZ-110, KAZV-110) and the transmitter (KNN-110) for electrification article built-in.
  

• It is the optimum, when it includes in various electric products and it makes the apparatus of small [ independent ] and few current drive.
  
• 3.3V 3V There is an output terminal. 3. Voltage is stabilized when 3V have much change of load current.
  
• By the case where load current is stable, 3V terminal is used, when a ripple is few necessity.
  
• The input terminal of this device is connected to A.C100V line, and an output terminal is only connected to target apparatus.
  
• The ground line of this device is AC line in common.
  
• Please take great care about insulation to be unable to touch the metal case of the incorporated apparatus.
  

Efficient switching system direct-current power supply unit
Input voltage A.C80V ~ A.C130V (or AC200V ~ 240V Option)
Output voltage 3V, 3.3V
The maximum current 10mA
Ripple Below 100micro V
Input change 30mV or less (permission regulation change within the limits)
Load change 100mV or less
Operating temperature range -15 degree-C ~ 50 degree C
Outside size 12x18x6mm
Weight About 3g